For products such as tile adhesive and wall putty
PRODUCT OVERVIEW
For expanding capacity and increasing automation at existing mortar plants, or for new large-scale projects. Improve mixing efficiency and reduce manual batching and handling of finished products.
01
Shorter mixing cycles help improve batch production efficiency.
02
Materials are weighed and dosed according to the recipe, then mixed for the preset time.
03
Tile Adhesive
Wall Putty
Masonry Mortar
Plastering Mortar
Gypsum Plaster
Tile Grout
PROJECT CONDITIONS
Configuration tailored to your project
Reference Daily Output
300 t/day (for tile adhesive and wall putty)
Effective Operating Time
One shift per day, 8–10 hours
Staff per Shift
Reference Installation Area
Required Clear Installation Height
Packaging & Palletizing
Mixing time refers to one batch. Actual output varies with the product recipe, batch size and packaging configuration. Site dimensions are confirmed for each project.
LAYOUT & PROCESS
Equipment arrangement and installation layout
1Raw Material Storage2Conveying & Weighing3Elevating & Buffering4Mixing5Finished-Product Buffering6Weighing & Packing7PalletizingTap the image to enlarge
01 · Raw material storage
02 · Conveying & weighing
03 · Elevating & buffering
04 · Mixing
05 · Finished-product buffering
06 · Weighing & packing
07 · Palletizing
These outline drawings show equipment components and their relative positions. The final design determines the actual installation layout.
PROCESS & EQUIPMENT

Store sand, cement, gypsum and other raw materials for conveying and batching.

Weigh materials according to the recipe, with screw conveyors controlling the feed for accurate batching before mixing.

Lift weighed materials into the pre-mix hopper for temporary storage, then feed the mixer according to the production cycle.

Mix the dry ingredients specified by the recipe, such as cement, gypsum, ground calcium carbonate and additives, to obtain a uniform blend.

Temporarily store the mixed material between mixer discharge and packaging.

Fill bags with the mixed material to the preset weight.

Pick bags from the conveyor and stack them layer by layer in the preset pattern.
Equipment configuration and process connections are defined in the project design.
CUSTOMER PROJECTS
From equipment planning to on-site production
Explore complete line layouts and actual operation
For wall putty, tile adhesive, gypsum plaster and self-levelling mortar.
Tell us what you plan to produce and your target output, and we can discuss the details.
MIXING SYSTEM
Twin-Shaft Paddle Mixer
Mixing design, discharge control and maintenance
Mixing · Discharge · Maintenance
The mixer uses twin shafts with paddles and a pneumatic discharge mechanism. Inspection openings and bolted paddles provide access for checks, cleaning and component replacement.
Mixing Design
Twin shafts and paddles agitate the material
Discharge Control
Pneumatic mechanism opens and closes the discharge gate
Routine Maintenance
Access to paddles, shaft ends and inspection openings
Click an image to enlarge ↗
01 Mixing Design
Staggered paddles on the two shafts agitate the material for batch mixing. Mixing time depends on the material and recipe.
02 Drive System
A motor and gearbox drive the mixing mechanism. The drive components are grouped for convenient inspection and servicing.
03 Discharge Control
Pneumatic cylinders open and close the discharge mechanism between mixing and unloading. Cylinder quantity and controls depend on the model.
04 Shaft Ends
Inspect shaft-end seals, dust protection and routine service points. Seal design and maintenance requirements depend on the material and model.
05 Paddle Connections
Bolted paddles can be removed for replacement and inspection. Paddle material and adjustment methods depend on the model.
Internal images illustrate mixing and paddle connections. Paddle-arm designs vary between the images and do not represent the complete construction of a single model. The confirmed equipment specification determines the actual paddle arms, drive and seals.
FACTORY & MANUFACTURING
11 yearsof manufacturing experience
With 11 years of development, our factory focuses on dry mortar, sand drying, packaging and palletizing equipment. These factory, showroom and workshop photos show manufacturing from structural fabrication to assembly.
PACKING & EXPORT DELIVERY
Wooden-crate packing, truck loading and container securing show how equipment is prepared for delivery.
DRY MORTAR PROJECT INQUIRY
Start with the dry mortar products you want to make and your target daily output. We can discuss raw material supply, factory dimensions and formulations as we go.
Discuss batching, mixing and packaging
Plan the production line around your site
Review the quotation and what it includes
Choose the contact method that suits you.
Contact us using the buttons above, or leave your requirements in the form.
One contact method is enough to get started. All other fields are optional.
LIYUAN MACHINERY | Zhengzhou, China