40–50 t/day Dry Mortar Production Line

For products such as tile adhesive and wall putty

50 t/day dry mortar equipment — four views of the line and palletizing equipment at customer sites
Customer Projects

PRODUCT OVERVIEW

Product Overview

For new plants
and additional production lines

Horizontal single-shaft ribbon mixer · Automatic weighing and batching of main ingredients

Built around a horizontal single-shaft ribbon mixer, this line suits first-time dry mortar producers and existing factories adding a separate production line. It helps reduce cleaning and scheduling disruptions caused by frequent product changes.

The line integrates material feeding, weighing, mixing and valve-bag packing. Upstream feeding is configured to suit raw-material storage and supply conditions.

Mixing time: approximately 10 minutes per batch

Based on tile adhesive and wall putty

Automatic weighing and batching of main ingredients

No manual weighing or feed switching for main ingredients

Suitable Products

Tile adhesive applied with a notched trowel

Tile Adhesive

Wall putty application

Wall Putty

Brickwork with mortar joints

Masonry Mortar

Cement-based plaster applied to a wall

Plastering Mortar

Gypsum plaster applied to an interior wall

Gypsum Plaster

Tile Grout

PROJECT CONDITIONS

Reference Specifications & Site Requirements

Staffing and equipment configuration depend on the products, raw-material supply and site conditions.

Daily output40–50 t/day
Working time1 shift, 8–10 hours/day
OperatorsApprox. 2–3 people
Footprint40–50 m²
Packing & palletizingOptional, to suit your needs
  • Daily output is based on tile adhesive and wall putty.
  • Footprint excludes the palletizer. Layout can be adapted to your site.
  • Palletizing options: straight-arm, articulated-arm or robotic.

Daily output is a planning reference. Actual capacity depends on the formulation, raw-material condition and packing capacity.

EQUIPMENT & WORKFLOW

Equipment Layout & Process

From ingredient feeding to bagged product,
see how the stages connect.

Automatic batching of main ingredients

Materials are weighed and fed in sequence according to the recipe, without manual weighing of each main ingredient or manual feed switching.

Load cells on the mixer provide weight feedback. The control system runs each screw feeder, stops it at the target weight and switches to the next ingredient.

Two screw feeders, mixer, secondary elevator, finished-product hopper and valve-bag packer1Screw Feeder 12Screw Feeder 23Mixer4Secondary Elevator5Finished-Product Hopper6Valve Bag Packing Machine
  1. 1Screw Feeder 1
  2. 2Screw Feeder 2
  3. 3Mixer
  4. 4Secondary Elevator
  5. 5Finished-Product Hopper
  6. 6Valve Bag Packing Machine
Two screw feeders, mixer, secondary elevator, finished-product hopper and valve-bag packer1Screw Feeder 12Screw Feeder 23Mixer4Secondary Elevator5Finished-Product Hopper6Valve Bag Packing Machine
The numbered labels match the six process steps below.

From Feeding to Weighing & Packing

Two main-ingredient feeding routes are shown. Actual ingredients depend on the product recipe.

  1. 01

    Screw Feeder 1

    Automatically feeds the first main ingredient into the mixer according to the set weight.

  2. 02

    Screw Feeder 2

    The second main ingredient is then fed automatically to its preset weight.

  3. 03

    Mixing

    Mixes the main ingredients and additives evenly.

  4. 04

    Secondary Elevation

    Transfers mixed material to the finished-product hopper.

  5. 05

    Finished-Product Buffering

    Buffers mixed material and feeds the packing machine.

  6. 06

    Weighing & Packing

    Bags are placed manually and filled to the preset weight.

CUSTOMER PROJECTS

Customer Projects

From equipment planning to on-site production

Explore complete line layouts and actual operation

Small-Scale Tile Adhesive Production Line

Small-Scale Tile Adhesive Production Line

Small-Scale Gypsum-Based Dry-Mix Production Line

Small-Scale Gypsum-Based Dry-Mix Production Line

CONFIGURATION & STRUCTURE

Core Configuration & Construction

01 / Mixer Drive

Copper-wound motor
with gear reducer

A copper-wound motor and gear reducer lower the speed and increase output torque to drive the ribbon mixer.

02 / Internal Mixing Structure

Single-shaft, three-layer ribbons
for material circulation

Single-shaft three-layer ribbon structure

Outer ribbon · Middle ribbon · Inner ribbon

The outer, middle and inner ribbons work together on one shaft to circulate and turn the material during mixing.

Illustration of the ribbon structure.

03 / Weighing & Packing

Valve-bag Packing Machine
5–8 bags/min

Blue and white valve-bag weighing and packing machine

Bags are placed manually. The machine weighs and fills to the preset bag weight, reducing manual filling and weighing work.

Factory & Manufacturing

11 years of dry mortar equipment manufacturing, shown through real photos of our showroom and production workshops.

20,000 m²

Manufacturing area

1000+

Projects documented on video

Designed for Your Project

Equipment suited to your material, output and site.

Factory Site and Entrance

Factory Site and Entrance

Equipment Showroom

Equipment Showroom

Mixer Assembly

Mixer Assembly

LIYUAN MACHINERY production workshop

Workshop Production

PACKING & SHIPMENT

Packing & Export Shipment

Wooden crates, component packing, equipment loading and container securing —
every stage before dispatch.

Loading Large Equipment

Loading Large Equipment

Wooden Crate Packing

Wooden Crate Packing

Loading Wooden Crates

Loading Wooden Crates

Accessory Packing

Accessory Packing

Container Securing

Container Securing

Container Loading

Container Loading

Dryer Equipment Shipment

Dryer Equipment Shipment

Complete Line Loading

Complete Line Loading

DRY MORTAR PROJECT INQUIRY

Tell us your requirements.
Let’s plan your dry mortar line.

Start with the dry mortar products you want to make and your target daily output. We can discuss raw material supply, factory dimensions and formulations as we go.

Discuss batching, mixing and packaging

Plan the production line around your site

Review the quotation and what it includes

Prefer to talk directly?

Choose the contact method that suits you.

Contact us using the buttons above, or leave your requirements in the form.

Leave your contact details

One contact method is enough to get started. All other fields are optional.

LIYUAN · Homepage Inquiry

dry-mix mortar and related equipment
Packaging · Palletizing

Based on your production conditions.

LIYUAN MACHINERY | Zhengzhou, China

How can we help?

Choose how to message us about your equipment needs.

Your inquiry: 40–50 t/day Dry Mortar Production Line

滚动至顶部